rust remover

I. Overview and Purpose: DB-TP-6-type shot blasting machine is under the cylinder factories, cylinder testing station, and gas supply stations manufacturing and maintenance work needs to monitor the procedures for compliance with safety standards of cylinders (such as a variety of liquefied petroleum gas cylinders, each kinds of oxygen, hydrogen, nitrogen and other high-pressure gas cylinders and gas cylinders and acetylene cylinders, etc.) made after the regular use of surface rust use, the device absorbs the advantages of similar products at home and abroad, with advanced technology, structure, strong performance reliable, easy to operate, continuous production applies to all types of vessels on the surface oxide layer and the original anti-corrosion layer Shot blasting a thorough clean-up, fast, effective, saving labor, is a gas cylinder manufacturing and testing unit of the most practical devices. 2, Technical parameters: Processing cylinder diameter: Φ220 425mm Processing efficiency: 30m2 / h Throwing the first motor power: 2 × 5.5kw Raceway Motor Power: 1.1kw Exhaust motor power: 2.2kw Total Power: 14.3kw Projectile Specification: Φ1.0 1.5 wire cutting pill The first time, the amount of projectile load: 100 200kg Projectile Consumption: 0.01kg/m3 Exhaust Fan Air Flow: Q = 2729m3 / h Pressure: P = 1091Pa Cast the first impeller diameter: Φ366mm Throwing the first impeller speed: 2074r/min Raceway reducer Model: WB120-WD-17-1100 Raceway reducer speed: 82r/min Raceway Speed: 82r/min Overall dimension (L × H × W): 3400 × 1640 × 700 Weight: 3.2T